What Is a Security System Design Consultant and How Do They Work With Division 27?

TL;DR

  • A security system design consultant is a design-side professional who produces the Division 28 (Electronic Safety and Security) drawings and specifications for a building project.
  • Division 28 covers access control, video surveillance, intrusion detection, mass notification, and related electronic security systems.
  • Division 28 systems connect through the Division 27 structured cabling infrastructure, which makes coordination between the two divisions essential during design development.
  • A security system design consultant is vendor-neutral: their specifications describe performance requirements that multiple contractors can bid, not products from a specific manufacturer.
  • The security system design consultant's work begins during schematic design and runs through construction administration, the same engagement model as the rest of the technology design scope.

What Does a Security System Design Consultant Do?

A security system design consultant is the design professional responsible for defining, coordinating, and documenting a building's electronic safety and security systems. Their scope covers the full range of Division 28 systems – access control, video surveillance, intrusion detection, mass notification, and intercom – and their integration with the building's Division 27 structured cabling backbone, its architectural elements, and its MEP systems.

The global access control market alone was valued at $10.76 billion in 2024,1 reflecting the growing complexity of security systems on commercial building projects. That complexity makes proper design-phase documentation increasingly important: security systems that aren't designed and coordinated during design development produce the same pattern of field conflicts, incomplete construction documents, and change orders as any other under-documented technology scope.

The security system design consultant's main deliverable is a set of construction documents, which includes:

  • Division 28 drawings showing equipment locations, wiring diagrams, and system architecture
  • Division 28 specs describing each system's performance requirements in vendor-neutral language

Those documents become part of the bid set, enabling competitive bidding by qualified security contractors. In this blog, we'll explain what goes into security building design, where the most common coordination gaps show up, and how the right consultant can design effective Division 27 and Division 28 security systems.

What Are Division 28 Security Systems?

Division 28 (Electronic Safety and Security) covers the systems that protect a building's occupants, assets, and perimeter using electronic means. The primary systems under Division 28 scope on a commercial building project include:

Access Control

Access control systems manage who can enter which areas of a building and when. These include:

  • Card readers
  • Credential management software
  • Door hardware integration
  • Perimeter access points

On a complex project, access control may cover hundreds of doors across multiple security zones.

Mass Notification

Mass notification systems distribute emergency alerts across a building or campus through speakers, strobes, and digital displays. On institutional or campus projects, mass notification design is among the most complex Division 28 systems to coordinate, particularly when it overlaps with the AV paging system.

Video Surveillance

Video surveillance systems include:

  • IP cameras
  • Recording servers
  • Monitoring workstations

Because camera placement affects everything from sightlines to power distribution, the video surveillance design determines camera coverage, resolution requirements, and storage capacity.

Video surveillance design determines camera coverage, resolution requirements, and storage capacity.

Intrusion Detection

Intrusion detection systems include:

  • Motion sensors
  • Door and window contacts
  • Glass break detectors
  • Control panels

These systems require power, conduit routes, and communications pathways – which must all be coordinated with the Division 27 cabling infrastructure.

How Do Division 28 and Division 27 Interact?

The most important coordination relationship for a security system design consultant is the interface between Division 28 and Division 27 (Communications). Division 28 systems are physically connected through Division 27 infrastructure: access control panels, cameras, and intrusion detection devices all require low-voltage cabling, conduit routes, and termination points that are part of the structured cabling design.

When the same technology consultant designs Division 27 and Division 28, the interface is coordinated from the start. That means conduit routes are shared where possible, equipment rooms are sized to accommodate both Division 27 and Division 28 hardware, and pathway plans reflect the combined cabling load.

However, when Division 27 and Division 28 are designed independently, the interface becomes a source of conflicts. Conduit that was sized for Division 27 may not have capacity for Division 28 cable counts. Equipment rooms may not have rack space for security controllers and recording servers. Those conflicts surface at submittal or installation, where resolving them requires coordination between multiple contractors and often generates change orders.

The most damaging version of this we’ve encountered at TMC is a mismatch between the technology drawings and the electrical drawings. On one project, the technology set correctly showed the fiber and copper serving a sensitive lab space, while the MEP drawings didn't show the conduit those runs required. Since the gap wasn't caught until construction, it became a substantial change order from the electrician, with the architect left exposed for a coordination miss that a jointly designed technology and security scope would have caught on paper.

Door Hardware Coordination: The Most Common Division 28 Gap

The most common Division 28 coordination gap the TMC team sees on commercial building projects is the interface between access control door hardware and the architectural door and frame specifications in Division 08. Access control systems require electrified door hardware that must be coordinated with the door frame type, the door material, and the hardware set specified in Division 08, such as:

  • Strikes
  • Magnetic locks
  • Request-to-exit devices
  • Door position switches

When this coordination happens during design development, the Division 08 specs reflect the Division 28 hardware requirements. But when it doesn't happen until submittal or installation, the Division 28 contractor discovers that the door frames don't accommodate the required hardware – requiring substitution requests, frame modifications, or hardware redesign that delays substantial completion.

A security system design consultant who coordinates with the architectural team during design development catches those conflicts before they reach the field. That coordination is part of the design-phase value, and it's a coordination task that no other member of the design team is equipped to handle.

Division 28 security systems are as design-intensive as any other building system.

Frequently Asked Questions

What is a security system design consultant?

A security system design consultant is a design-side professional who produces the Division 28 drawings and specifications for a building project. Their scope covers:

  • Access control
  • Video surveillance
  • Intrusion detection
  • Mass notification
  • Other related systems

They produce construction documents that describe each system's performance requirements, equipment placement, wiring architecture, and installation conditions in vendor-neutral language that enables competitive bidding.

What is access control system design?

Access control system design is the process of defining, documenting, and coordinating the access control systems for a building during the design phase. It includes determining the security zones, specifying the credential management system, designing the door hardware integration, and coordinating the cabling and conduit infrastructure that connects the access control devices to the security control network. The output is a set of Division 28 construction documents that contractors can use to price and install the system accurately.

What's the difference between Division 27 and Division 28?

Division 27 (Communications) covers the systems that move data, voice, audio, and video signals through a building: structured cabling, AV, and DAS. Division 28 (Electronic Safety and Security) covers the systems that protect the building's occupants and assets using electronic means: access control, video surveillance, intrusion detection, and mass notification.

Division 28 systems use the Division 27 cabling infrastructure to connect to the building's network – making coordination between the two divisions essential during design development.

When should a security system design consultant be engaged?

A security system design consultant should be engaged during schematic design, when equipment room locations, security zone layouts, and conduit pathway strategies are being established.

Engaging at or after construction documents means the architectural and MEP decisions that affect Division 28 scope have already been made without security system input – producing coordination gaps that show up as change orders during construction.

Bring Security Into the Design, Not the Field

The change orders that surface on security-intensive projects rarely come from bad hardware or a bad contractor. They come from Division 28 scope that was never designed alongside Division 27 and the architecture, so the conduit, the equipment rooms, and the door frames don't quite fit the systems they were meant to carry. Those gaps are avoidable when security is designed in from schematic design forward.

At TMC, we’ve produced Division 27 and Division 28 design for architects for more than 35 years, engaged directly under the architect as a separate, vendor-neutral scope. We design the security systems alongside the structured cabling backbone they depend on, produce the coordinated drawings and performance-based specifications that hold up at bid, and stay engaged through construction administration to confirm the installed systems match the design intent.

Designing a project with a lot of security requirements? Reach out to TMC today, and we'll help you coordinate Division 28 with the rest of the design before it becomes a field problem. 

Sources

  1. https://www.grandviewresearch.com/industry-analysis/access-control-market-report

Expert Insights

Read our blog for strategic guidance and analysis from TMC’s technology consultants.

What Is a Security System Design Consultant and How Do They Work With Division 27?

TL;DR A security system design consultant is a design-side professional who produces the Division 28 (Electronic Safety ...

What Is a Security System Design Consultant, and When Do You Need One?

A security system design consultant is responsible for producing the Division 28 (Electronic Safety and Security) ...

What Should Be in a Technology Design Services Scope for a Building Project?

TL;DR A complete technology design services scope covers all technology systems the project requires, typically ...

Let’s Build What’s Next

Connect with our team to start planning secure, scalable technology systems that support your mission and future growth.

Get Started